Synchronisation
Getting started with your Easyfit Touch 2
It is important to follow these steps to connect your new fitness tracker to your smartphone. Please remember that to get the best out of your product you must keep Bluetooth on. Don’t worry about how much battery life your device will use: Bluetooth connections are one of the least power-hungry connections.
We recommend charging your Easyfit Touch 2 for at least half an hour before its first use. Use a 5 V – 500/1000 mAh USB port as excessive voltages might damage components and the battery life.
When you first turn it on, a 4-figure number will appear in the centre of the screen: remember or make a note of this number as it identifies your device and might be useful for the Bluetooth connection.
Follow these few steps and you’ll see how easy it is to start using your Easyfit Touch 2.
1. Download the Easyfit Plus app
There are 2 QR codes on the pack of your product, one to download the Android app and another for the iOS app. Before getting started, we recommend using a Wi-Fi connection to download the app. Point the reader (if you don’t have one, you have to download a specific app to read QR codes, there are many available, just look on the app store) on the QR code you want and follow the steps on your smartphone display to download the app.
2. Activate the app
Once you’ve downloaded the app, open it and enter the requested information. This information is important and allows the algorithm to work properly collecting data on movement and the relative analysis. The data you enter is important for your basal metabolic rate, which is the main factor our algorithm uses to calculate the calories burned during the day and at night when you’re asleep.
3. Connect your Easyfit Touch 2 to the app
Once you’ve entered your body info and the step goal you’ve set yourself, you’ll need to connect the device to your smartphone.
Please follow these steps:
a. Turn on Bluetooth on your phone
b. Take your Easyfit Touch 2 which will be charged by now and ready to be connected
c. You’ll see your Easyfit Touch 2 appear on the search screen, as shown in the image below
d. Select your Easyfit Touch 2; you’ll see a device indicating the same four figures which you saw on your Easyfit Touch 2.
e. Once you’ve selected it, you’ll be directed to the Home page where you’ll see all your counters for both night and day modes.
How do I access the app’s main settings?
You’ll see all the devices you’ve connected under the Device section. Here, you can select which to use and see all the data collected on the Home section.
Click on the device labelled as “In use” and you’ll access the main settings menu on your Easyfit Touch 2.
You’ll find details below on all the menus.
Device name: you can change the name of your Easyfit Touch 2 to a name you prefer
Image: you can allocate an image to your device
Connection status: this shows whether your Easyfit Touch 2 is connected
Personalised reminders: here, you can add all your reminders to be shown on the display of your Easyfit Touch 2 under the List section.
Measurement unit: you can select the measurements units for your data, using either the metric or imperial system
Exercise reminder: this lets you manage your exercise reminder. For more information, please see the “What is the exercise reminder?” section.
Alarm settings: you can set one or more alarms
Sync: click here to sync your data
Lifestyle: turn on this feature to receive advice on how to improve your health
Vibration setting: you can choose the type of vibration and the repetitions for each notification you receive on your Easyfit Touch 2.
Automatic sleep monitoring: turn on this feature and manage your automatic sleep monitoring
Wrist sense: this feature lets you see the time and turn on the display just by moving your wrist. Move your arm up to the position you’d usually adopt to look at your watch. Your Easyfit Touch 2 display will turn on automatically.
Time format: select how you want to see the time, in either 12 or 24 hour format.
Language: set the language of your Easyfit Touch 2
Date format: set the date format: MM/DD means month/day while DD/MM means day/month.
Set-up: this control lets you check if any operating system updates are available for your Easyfit Touch 2.